S-multiple

FusFree Series

FusFree ™ с-multiple квик-займет поддержк Material can achieve fast and easy peeling by adjusting the bonding strength to Из-за того, что я не знаю, что мне делать, я не знаю, что делать нет

Официальный канал/торговый представитель Мне нужно кое-что купить.

Прикладной случай Прикладной случай

В случае несоответствия на данный момент может быть представлено предложение о приобретении приложений для консультаций по продукту.

Войдите в контраст параметров потребления ↗ Консультация по продукту ›

- HDT-A / degC

- HDT-B / degC

- Young's Modulus / MPa

- Tensile Strength / MPa

Diameter1.75mm Weight2.5kg / 3kg

Spool Info

div "ds-material-feature-loading"> загружает функциональные характеристики материалов. Loading filament properties и radar... < / див > < / див >

ПАРАМЕТРЫ ПРОДУКТА V2

FusFree™ S-Multi

Synced from Product Parameters V2: Basic & Appearance

Product Name FusFree™ S-Multi

Product Model S-Multi

Forming Process FDM Compatible Filament

Color / Appearance 纯色（Natural）、黑色（Black）

Package Weight 2.5 kg / 3 kg

Filament Diameter 1.75 mm

Brand FusRock

Supplier FusRock

> > > > > > >< < < < > > >< < < < > > >< < < < > > >< < < < > >< < < < > > >< < < < > > >< < < < > > >< < < < > > >Recommended printing conditions >

Printing Tips > > : И из-за того, что я не знаю, что мне делать. С другой стороны, Это как раз то, что нам нужно Пожалуйста, пусть будет так Где-то в районе, где можно немного расслабиться. Bubbles extruded and раф printing поверхн, пожалуйст dry the filament in an oven at 80-100 ℃ for 4-6h to restore the Это как-то связано с тем, что у нас есть план действий. Почему нельзя просто взять и уйти. Это из-за того, что он работает в 12 - м участке. material в прямом эфире из стэндла, И в случае, если это случится, Так что это как-то связано с тем, что происходит на самом деле. The pri < / p >

Тип материала

Версия

Время

Действие

TDS

4.1

2025-01-01

Пока нет совпадений по профилю.

ПАРАМЕТРЫ ПРОДУКТА V2

Параметр печати

Параметры продукции, которые синхронизированы и взаимосвязаны между собой, могут использоваться в качестве отправной точки для разрезания и тестирования женьшеня.

Printing Window

Core temperature, speed and cooling settings from Product Parameters V2.

Nozzle Temperature 260 - 280 °C

Bed Temperature 70 - 90 °C

Print Speed 30 - 120 mm/s

Suggested Nozzle 0.4 - 1 mm

Hardware & Platform

Nozzle, build plate and pre-print preparation recommendations.

Nozzle Material It is recommended to use hardened steel and above grade nozzles

Build Plate Material Coating with PVP glue

Enclosure Printing No enclosure required. If using an enclosed printer, enable chamber ventilation to prevent nozzle clogging.

Support & Compatibility

Support material, spacing and compatible material recommendations.

Retraction 0.6 - 2 mm

Retraction Speed 30 - 60 mm/s

Support Density 15 - 20 %

Support Dense Layer Thickness 3 - 5 mm

Support XY Distance 0.3 - 0.6 mm

Support Border Loops 1 loops

Notes

Additional guidance maintained in Product Parameters V2.

Other Suggestions FusFree™ S-Multi very easy to absorb moisture within the environment, and printing after absorbing moisture will result ozzing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the FusFree™ S-Multi vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. After the material is damp, there will be more printing ozzing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 80-100℃ for 4-6h to restore the printing quality of FusFree™ S-Multi. It is recommended to use hardened steel and above grade nozzles made by Phaetus, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block is longer 12mm. In dual-extruder printing mode, the material in the standby nozzle will deteriorate due to prolonged heating, and the deteriorated material needs to be squeezed out before the print nozzle is switched, so it is necessary to use the Wipe wall or Wipe tower function in the slicing software. After the printing is completed, the printed part can be annealed and then the FusFree™ S-Multi removal step can be performed. During the annealing process, FusFreeTM S-Multi can play the role of supporting the body material, reducing the dimensional deformation of the body material and improving the mechanical properties of the body material. Annealing conditions: set according to the requirements of the body material.

В настоящее время отсутствуют записи о решениях, с нетерпением жду.

Общие вопросы, не включённые в данный момент, пожалуйста, ожидайте.

通用安全提示（FusRock）

长期大量使用 3D 打印材料时，建议在专用房间操作并保持通风。
有过敏史者请确认所用材质不会引发过敏反应。
有呼吸道慢性病者请佩戴口罩；其他人员也强烈建议操作时佩戴口罩。
对纤维类打印件进行打磨、切割等可能产生纤维逸出的操作时，请做好防护，避免刺入或吸入。
打印时请远离儿童与婴幼儿，注意环境安全。

Storage (moisture protection)

Short breaks	Store in a sealed dry box or apply a simple vacuum pack; avoid direct sunlight.
Long-term storage	Return filament to the factory foil bag, squeeze out air (add a fresh desiccant pack if available), then place inside a household vacuum bag and pull vacuum. Keep in a cool, dry place away from sunlight.

Drying damp filament — guidelines

Drying parameters

PTC compact dryer box: 60–70 °C for 4–6 hours.

Small lab oven (forced-air): temperature uniformity is often limited; spools can warp. Reduce temperature/time (example: 40–45 °C for ~4 hours) and cross-check the material-specific drying notes in the datasheet.

Important: if print quality does not improve, test with an empty spool before raising temperature—non-uniform heat can deform plastic flanges.

Large forced-air oven: 60–70 °C for 4–6 hours.

PS: Why do devices differ? Add an internal article or external link (“learn more”).

Precautions

⚠ Read before drying

When in doubt, run an empty-spool temperature trial before increasing heat.
Follow the recommended temperatures/times from the product / material admin page.
Prefer forced-air ovens; do not blast the spool directly with hot air.
Avoid exposing the spool edge to a violent air jet.
Do not rest spools only on wire racks—use a flat heat-spreading plate if needed.
Hot spools can burn—use gloves.
Observe fire and electrical safety.
Avoid microwave ovens or other uneven heaters; a temperature-controlled drying oven is preferred.

(Insert “warped vs normal” spool photos here.)

Dry vs damp

What moisture does to prints

Dry	Damp
Cleaner surface, stable color, mechanical properties on spec	Pitting, stringing, whitening, weaker properties (material dependent)

(Optional: 1 / 2 / 3 day exposure at ~80% RH — same test part.)

* Example photos may reference a specific grade (e.g. PAHT-CF); label yours accordingly.

Fusrock® 3D printing filaments are suitable for general printing applications and have been tested under standard conditions. However, the performance and safety of printed products are influenced by multiple factors, including printing parameters, model design, operating environment, and intended use. By using Fusrock® materials, users acknowledge and agree to independently evaluate the suitability of printed items for their specific applications and assume all associated risks. Fusrock® shall not be held liable for any damages, injuries, or losses resulting from the practical use of products printed with its materials, including but not limited to structural failures, malfunctions, or safety hazards in operational environments. Thorough testing must be conducted before applying printed components to critical, functional, or commercial scenarios. Fusrock® products are not certified for medical, aerospace, or life-support systems, except for certifications explicitly stated by Fusrock® for specific materials.

Copyright & Terms of Use Notice
Thank you for visiting our website! Please carefully read the following Copyright Statement and Terms of Use before using this website:
Copyright Statement
All content on this website, including but not limited to texts, images, graphics, audios, videos, software, as well as their compilations, codes and technical architectures (collectively referred to as the "Content"), are owned by this website or relevant right holders and protected by the Copyright Law of the People's Republic of China and other applicable laws and regulations.
Without the prior written authorization of this website, no entity or individual may copy, repost, disseminate, modify, display, adapt, mirror, upload, download or otherwise use the Content of this website in any form.
The copyright of any third-party content quoted on this website shall belong to the original right holders. If your legitimate rights and interests are infringed due to reasons not attributable to this website, please contact us promptly, and we will handle the matter immediately upon verification.
Terms of Use
You may browse, download or print the Content of this website for non-commercial purposes in compliance with relevant laws, regulations and this Notice, provided that all copyright notices and other proprietary information are retained without any modification whatsoever.
Any commercial use of the Content or services of this website is strictly prohibited, including but not limited to creating derivative works based on the Content, selling or distributing the Content to third parties.
It is prohibited to use automated tools (such as crawlers, robots, etc.) to obtain, copy, monitor or attempt to access the content or data of this website.
Disclaimer
This website endeavors to provide accurate and reliable information, but makes no express or implied warranties regarding the completeness, timeliness or accuracy of the Content.
This website shall not be held legally liable for any direct or indirect losses arising from your use of the Content or services of this website.
This website may contain links to third-party websites, and this website assumes no responsibility for the content and acts of any third-party websites.
Rights Protection
If you violate this Notice and infringe upon the legitimate rights and interests of this website, we reserve the right to pursue legal liabilities, including but not limited to filing a lawsuit or taking other legal measures.
Should you have any inquiries regarding this Notice, please contact us via: [email protected]
The final right of interpretation of this Notice belongs exclusively to this website.

Products

S-multiple

S-multiple

FusFree™ S-Multi

> > > > > > >< < < < > > >< < < < > > >< < < < > > >< < < < > >< < < < > > >< < < < > > >< < < < > > >< < < < > > >Recommended printing conditions >

Параметр печати

Printing Window

Hardware & Platform

Support & Compatibility

Notes

Storage (moisture protection)

Обратная связь