Synced from Product Parameters V2: Basic & Appearance
| * | Recommended printing Boxer: ich fürchte, die frage ist: "okay, tt3 a thort Tips< p = Printing Tips:" S-Multi very easy to absorb moisture within the environment, and printing after absorbing moisture will result ozzing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the S-Multi vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage.After the material is damp, there will be more printing ozzing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 80-100℃ for 4-6h to restore the printing quality of S-Multi.It is recommended to use hardened steel and above grade nozzles made by Phaetus, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block is longer 12mm.In dual-extruder printing mode, the material in the standby nozzle will deteriorate due to prolonged heating, and the deteriorated material needs to be squeezed out before the print nozzle is switched, so it is necessary to use the Wipe wall or Wipe tower function in the slicing software.After the printing is completed, the pri
No matching print profile files.
PRODUCT PARAMETERS V2
DruckparameterParameter aus dem verknüpften Produktparameter-Profil V2 — Ausgangspunkt für Slicing und Testdrucke. Printing WindowCore temperature, speed and cooling settings from Product Parameters V2.
Nozzle Temperature
260 - 280 °C
Bed Temperature
70 - 90 °C
Print Speed
30 - 120 mm/s
Suggested Nozzle
0.4 - 1 mm
Hardware & PlatformNozzle, build plate and pre-print preparation recommendations.
Nozzle Material
Es wird empfohlen, verhärteten stahl und höhere schilde zu benutzen
Build Plate Material
Nur die pip und die pap
Enclosure Printing
Ohne außenhaut. Eingelegte drucker benutzen, um die düsen nicht zuzunähen.
Support & CompatibilitySupport material, spacing and compatible material recommendations.
Retraction
0.6 - 2 mm
Retraction Speed
30 - 60 mm/s
Support Density
15 - 20 %
Support Dense Layer Thickness
3 - 5 mm
Support XY Distance
0.3 - 0.6 mm
Support Border Loops
1 loops
NotesAdditional guidance maintained in Product Parameters V2.
Other Suggestions
FusFree ™ S - Multi einfach in umfeld wasser, und in wasser nach wird störung, aus mit blasen und rau aus, verringert zu. Empfehlungen öffnen FusFree ™ S - Multi vakuum verpackungszwecke. Gedruckt und, so bald wie möglich DengSi in GanSaoXiang in (luftfeuchtigkeit unter 15. Bitte geben sie die unbenutzte folie zum versiegeln zurück
Wenn das material nass wird, gibt es mehr gedruckte dornen, bläschen Oder raue oberfläche. Sie DengSi 80-100 ℃. Ich kann mich kaum bewegen in trocken 4-6h, zur wiederherstellung FusFree ™ S - Multi die qualität.
Für die verbesserung der qualität des drucks wird empfohlen, zunächst verhärteten stahl und oberen klassen zu benutzen. Z. b. empfiehlt es sich, die dicke der erhitzten blöcke um 12mm zu erhöhen.
Im doppelspießdruck wird der stoff in den leerlauflauf verschoben, bevor man die leerlaufdüsen wechselt. Dabei wird das material gepresst, bevor man die leerlaufdüsen wechselt.
Drucken, druckt für Von der TuiHuo, und drauf FusFree ™ S - Multi Von schritte. Bei einem feuer kann FusFreeTM S Multi den hauptteil stützen, verkleinerungen reduzieren und die mechanische leistungsfähigkeit des versuchsobors verbessern. Bedingungen für eine feueruntersuchung: richtet sich nach dem eigenschaften der richtet
No solution entries for this product yet. No FAQs for this product yet. 通用安全提示（FusRock）
Storage (moisture protection)
Drying damp filament — guidelines
Drying parameters PTC compact dryer box: 60–70 °C for 4–6 hours. Small lab oven (forced-air): temperature uniformity is often limited; spools can warp. Reduce temperature/time (example: 40–45 °C for ~4 hours) and cross-check the material-specific drying notes in the datasheet. Important: if print quality does not improve, test with an empty spool before raising temperature—non-uniform heat can deform plastic flanges. Large forced-air oven: 60–70 °C for 4–6 hours. PS: Why do devices differ? Add an internal article or external link (“learn more”). Precautions ⚠ Read before drying
(Insert “warped vs normal” spool photos here.) Dry vs damp What moisture does to prints
(Optional: 1 / 2 / 3 day exposure at ~80% RH — same test part.) * Example photos may reference a specific grade (e.g. PAHT-CF); label yours accordingly. Fusrock ® 3d-drucken ChangSi gelten normalerweise drucken, und bei unter getestet. Die leistungsfähigkeit und sicherheit der gedruckten produkte hängt jedoch Von einer reihe Von faktoren ab, darunter die parameter für das drucken, die konzeption des modells, das betriebssystem und den erwarteten einsatz. Durch Fusrock ®, nutzer zu und und unabhängige bewertungen drucken projekte ihre bestimmte anwendungen werden und die gesamten verbundenen risiken. Fusrock ®. Mit genutzt material & produkte schäden, Oder verluste, unter anderem struktur., fehlfunktion Oder. Der.. Bevor die druckkomponente auf zentrale, funktionale Oder kommerzielle szenen angewandt werden kann, ist eine gründliche prüfung vorzunehmen Fusrock ® produkte nicht zugang, raumfahrt Oder die lizenz aber Fusrock ® klar definierten bestimmte material lizenz außer.
Copyright & Terms of Use Notice
Thank you for visiting our website! Please carefully read the following Copyright Statement and Terms of Use before using this website: Copyright Statement All content on this website, including but not limited to texts, images, graphics, audios, videos, software, as well as their compilations, codes and technical architectures (collectively referred to as the "Content"), are owned by this website or relevant right holders and protected by the Copyright Law of the People's Republic of China and other applicable laws and regulations. Without the prior written authorization of this website, no entity or individual may copy, repost, disseminate, modify, display, adapt, mirror, upload, download or otherwise use the Content of this website in any form. The copyright of any third-party content quoted on this website shall belong to the original right holders. If your legitimate rights and interests are infringed due to reasons not attributable to this website, please contact us promptly, and we will handle the matter immediately upon verification. Terms of Use You may browse, download or print the Content of this website for non-commercial purposes in compliance with relevant laws, regulations and this Notice, provided that all copyright notices and other proprietary information are retained without any modification whatsoever. Any commercial use of the Content or services of this website is strictly prohibited, including but not limited to creating derivative works based on the Content, selling or distributing the Content to third parties. It is prohibited to use automated tools (such as crawlers, robots, etc.) to obtain, copy, monitor or attempt to access the content or data of this website. Disclaimer This website endeavors to provide accurate and reliable information, but makes no express or implied warranties regarding the completeness, timeliness or accuracy of the Content. This website shall not be held legally liable for any direct or indirect losses arising from your use of the Content or services of this website. This website may contain links to third-party websites, and this website assumes no responsibility for the content and acts of any third-party websites. Rights Protection If you violate this Notice and infringe upon the legitimate rights and interests of this website, we reserve the right to pursue legal liabilities, including but not limited to filing a lawsuit or taking other legal measures. Should you have any inquiries regarding this Notice, please contact us via: [email protected] The final right of interpretation of this Notice belongs exclusively to this website.  
|
|---|
