FusForce ™ PAHT

FusForce Series

FusForce ™ PAHT

PAHT

FusForce ™ PAHT предназнач для FDM трехмерн печа технологическ разработк, присутств материа в жар нейлонов ингредиент, низк гигроскопическ, высокопрочн, высок износостойк, химическ отличн и высок термостойк особен. Во врем печата размер стабильн хорош, без пропуст сторон схватк явлен, и с FusFree ™ S-PAHT легк стриптиз поддержива материал сочетан, решен сложн модел поддержива лиц эффект плох головоломк.

Официальный канал/торговый представитель Мне нужно кое-что купить.

Dry Condition72.5 Saturation hygroscopic conditions48

HDT-A / degC

Dry Condition79.6 Saturation hygroscopic conditions6

HDT-B / degC

Dry Condition3329.72 Saturation hygroscopic conditions2896.78

Young's Modulus / MPa

Dry Condition69.29 Saturation hygroscopic conditions57.63

Tensile Strength / MPa

Diameter1.75mm Weight1kg

Spool Info

div "ds-material-feature-loading"> загружает функциональные характеристики материалов. < / див > < / див >

ПАРАМЕТРЫ ПРОДУКТА V2

FusForce™ PAHT

Synced from Product Parameters V2: Basic & Appearance

Product Name FusForce™ PAHT

Product Model PAHT

Forming Process FDM Compatible Filament

Color / Appearance 本色（Natrual）、黑色（Black）

Package Weight 1 kg

Filament Diameter 1.75 mm

Brand FusRock

Supplier FusRock

> >

> >Recommended printing Conditions < / th > < td > Nozzle Temperature260-280 ° CRecommended Nozzle Diameter0.4-1.0 mmRecommended build поверхн TreatmentPEI or Coating with PVP glueBuild тарелк temperature70-80 ° CChamber TempSupports printing без sealingCooling fan speedOffPrint speed30 — 120 мм/speed1800 — 3600 мм /minRecommended Support на speedercity MaterialFusFree ™ с-PAHT квик-займет SupportDrying setting80-100 ℃ for 4-6hAnnealing80-100 ℃ for 4-8h >

< tbody > < tr > < th > < / th > < td > Nozzle Temperature260-280 ° CRecommended Nozzle Diameter0.4-1.0 mmRecommended Build поверхн treatmentPEI or Coating with PVP glueBuild тарелк temperature70-80 ° CChamber TempSupports printing без Spealingcooling fan speedOffPrint speed30 — 120 мм /sRetraction speed1800 — 3600 мм/минрекоммендед Поддержк MaterialFusFree ™ с-PAHT квик-займет SupportDrying setting80-100 ℃ for 4-6hAnnealing80-100 ℃ for 4-8h > >

Printing Tips > > : У меня есть кое-что для тебя. И затем, после того, как я вернусь, Это как раз то, что нам нужно Afteropening the FusForce ™ ️ PAHT vacuum foil бэг для printing пожалуйст put the unused filament back into theoriginal Где-то в районе, где можно немного расслабиться. Bubbles extruded and раф printing поверхн, пожалуйст dry the filament in an oven at 80-100 ° C for 4-6h to restore the Printing quality of FusForce ™ ️ PAHT, It is recommended to use hardened steel и above грейд nozzles made by Phaetus, Почему нельзя просто взять и уйти. Это из-за того, что она составляет 12 мм.

Тип материала

Версия

Время

Действие

TDS

5.2

2024-08-01

Пока нет совпадений по профилю.

ПАРАМЕТРЫ ПРОДУКТА V2

Параметр печати

Параметры продукции, которые синхронизированы и взаимосвязаны между собой, могут использоваться в качестве отправной точки для разрезания и тестирования женьшеня.

Printing Window

Core temperature, speed and cooling settings from Product Parameters V2.

Nozzle Temperature 280 - 300 °C

Bed Temperature 70 - 80 °C

Print Speed 30 - 200 mm/s

Suggested Nozzle 0.4 - 1 mm

Cooling Fan 20 - 20 %

Hardware & Platform

Nozzle, build plate and pre-print preparation recommendations.

Build Plate Material PEI or Coating with PVP glue

Support & Compatibility

Support material, spacing and compatible material recommendations.

Raft Gap 0.12 - 0.16 mm

Retraction 1 - 3 mm

Retraction Speed 30 - 60 mm/s

Прикладные дела, которые совпадают с текущими потребностями Отображаю конкретные классификации в реальном времени в разделе приложений за кулисами

4 Дело.

Прототипировани 2026-05-09

Petit moyeu de travail pour vérifier la conception

FusRock 3D printing materials in the Prototyping segment, illustrated by “Verification design of small work wheel rim”, balancing structural strength, print fidelity and field reliability.

Автомобильная от 2026-05-09

Outillage d’inspection de tubing automobile

FusRock 3D printing materials in the Automotive segment, illustrated by “Automobile oil pipeline inspection tools”, balancing structural strength, print fidelity and field reliability.

工业零部件 2026-05-09

Pièces de rechange connectées pour équipements industriels

FusRock 3D printing materials in the Industrial Parts segment, illustrated by “Spare parts for industrial equipment connection”, balancing structural strength, print fidelity and field reliability.

RC-автомобили 2026-05-09

Mécanique DIY électrique hydraulique scooter

FusRock 3D printing materials in the RC Cars segment, illustrated by “Mechanical DIY electric hydraulic scooter”, balancing structural strength, print fidelity and field reliability.

Общие вопросы, не включённые в данный момент, пожалуйста, ожидайте.

通用安全提示（FusRock）

长期大量使用 3D 打印材料时，建议在专用房间操作并保持通风。
有过敏史者请确认所用材质不会引发过敏反应。
有呼吸道慢性病者请佩戴口罩；其他人员也强烈建议操作时佩戴口罩。
对纤维类打印件进行打磨、切割等可能产生纤维逸出的操作时，请做好防护，避免刺入或吸入。
打印时请远离儿童与婴幼儿，注意环境安全。

耗材（防潮）储存要求

短期不使用时	放入密封防潮盒或进行简易抽真空即可，避免阳光直射。
长期不使用	将耗材放入出厂铝箔袋并尽量排出袋内空气（条件允许时在袋内再放一包干燥干燥剂）；外套一层家用抽真空保鲜袋后抽真空。置于阴凉干燥处，避免阳光直射。

耗材受潮处理方案及方法

烘干参数

PTC 小型烘干盒：60–70℃，烘干 4–6 小时。

小型恒温鼓风烘干机：箱内温度场往往不均匀，可能导致料盘变形；此类设备上建议适当降低温度并缩短单次烘干时间（示例：40–45℃，约 4 小时），并结合材料详情中的干燥建议综合判断。

重要：若按此温度烘干后打印效果仍无改善，请先用空料盘做温度测试，再酌情提高烘干温度，以防温度过高或不均匀导致料盘烘干变形。

大型恒温鼓风烘干机：60–70℃，烘干 4–6 小时。

PS：为什么不同烘干设备适用温度会有差别？可在后台插入说明或外链「点击了解」。

注意事项

⚠ 操作前请阅读

没有把握的请先用空料盘进行温度测试，以防温度过高或不均匀导致料盘烘干变形。
请严格遵循材料详情页 / 材料参数管理中推荐的烘干温度与时间。
建议使用鼓风干燥箱；不要让出风口直吹料盘（避免局部过热变形）。
烘干时注意避开强气流直吹线盘侧面。
勿将料盘直接搁在网状架子上（建议垫底金属板等平整受热面）。
取出高温料盘时注意烫伤。
注意防火与用电安全。
尽量选用箱内温度均匀的设备；避免使用家用微波炉等加热严重不均的方式；更推荐恒温鼓风干燥箱类设备。

（可插入「变形 vs 正常」料盘对比照片，注意控制烘干温度与摆放方式。）

干燥受潮对比

耗材受潮的影响

未受潮	受潮
表面相对整洁、颜色正常、力学性能在规格内	可能出现痘痕/毛刺/拉丝、颜色发白、力学性能下降等（因材料而异）

（可插入 RH80% 环境下拆封后第 1 / 2 / 3 天打印同一模型的对比图。）

* 上述吸湿对比示例可能因产品系列而异（例如 PAHT-CF），请在插入图片时于脚注中注明材料系列。

Прикладной отказ от ответственности, пока не показанный. Пожалуйста, сначала выберите или сопоставите записи «параметров связанных продуктов V2» для продукта за кулисами.

Copyright & Terms of Use Notice
Thank you for visiting our website! Please carefully read the following Copyright Statement and Terms of Use before using this website:
Copyright Statement
All content on this website, including but not limited to texts, images, graphics, audios, videos, software, as well as their compilations, codes and technical architectures (collectively referred to as the "Content"), are owned by this website or relevant right holders and protected by the Copyright Law of the People's Republic of China and other applicable laws and regulations.
Without the prior written authorization of this website, no entity or individual may copy, repost, disseminate, modify, display, adapt, mirror, upload, download or otherwise use the Content of this website in any form.
The copyright of any third-party content quoted on this website shall belong to the original right holders. If your legitimate rights and interests are infringed due to reasons not attributable to this website, please contact us promptly, and we will handle the matter immediately upon verification.
Terms of Use
You may browse, download or print the Content of this website for non-commercial purposes in compliance with relevant laws, regulations and this Notice, provided that all copyright notices and other proprietary information are retained without any modification whatsoever.
Any commercial use of the Content or services of this website is strictly prohibited, including but not limited to creating derivative works based on the Content, selling or distributing the Content to third parties.
It is prohibited to use automated tools (such as crawlers, robots, etc.) to obtain, copy, monitor or attempt to access the content or data of this website.
Disclaimer
This website endeavors to provide accurate and reliable information, but makes no express or implied warranties regarding the completeness, timeliness or accuracy of the Content.
This website shall not be held legally liable for any direct or indirect losses arising from your use of the Content or services of this website.
This website may contain links to third-party websites, and this website assumes no responsibility for the content and acts of any third-party websites.
Rights Protection
If you violate this Notice and infringe upon the legitimate rights and interests of this website, we reserve the right to pursue legal liabilities, including but not limited to filing a lawsuit or taking other legal measures.
Should you have any inquiries regarding this Notice, please contact us via: [email protected]
The final right of interpretation of this Notice belongs exclusively to this website.

Products

FusForce ™ PAHT

PAHT

FusForce™ PAHT

Параметр печати

Printing Window

Hardware & Platform

Support & Compatibility

Petit moyeu de travail pour vérifier la conception

Outillage d’inspection de tubing automobile

Pièces de rechange connectées pour équipements industriels

Mécanique DIY électrique hydraulique scooter

耗材（防潮）储存要求

Обратная связь