Add a discontinuation notice under Features in the CMS. Historical parameters and downloads can remain visible.
Synced from Product Parameters V2: Basic & Appearance
| Recommended printing conditions | Nozzle Temperature250-270 °CRecommended Nozzle Diameter≥0.2 mmRecommended build surface treatmentPEI or Coating with PVP glueBuild plate temperature100-120 °CChamber Temp80-100°CCooling fan speedoffPrint speed30-120 mm/sRetraction distance1-3 mmRetraction speed1800-3600 mm/minDrying setting100-110℃ for 4-5hAnnealing90℃-4h |
|---|
| | Nozzle Temperature250-270 °CRecommended Nozzle Diameter≥0.2 mmRecommended build surface treatmentPEI or Coating with PVP glueBuild plate temperature100-120 °CChamber Temp80-100°CCooling fan speedoffPrint speed30-120 mm/sRetraction distance1-3 mmRetraction speed1800-3600 mm/minDrying setting100-110℃ for 4-5hAnnealing90℃-4h |
|---|
Printing Tips：1.PC filament is sensitive to moisture and can easily have stringing during printing. To reduce the stringing and surface roughness effectively, keep your filament in a dry box and control relative humidity to below 15%. If the filament has absorbed moisture already, dry the filament in an oven at 100-110°C for 4 hours.2.It is recommended to anneal models printed with PC at 90℃ for 4h, which can effectively release the internal stress and prolong the service life.
No FAQs for this product yet.
No application disclaimer to display yet. Link a Product Parameters V2 record to this product in the admin.
