Synced from Product Parameters V2: Basic & Appearance
| Recommended printing conditions | Temperature280 -- 320 ° calibre de la cubierta recomendada 0.4-1.0mmsuperficie de construcción recomendada tratamiento pei o Coating with PVP glueBuild plate temperature60-80 °CChamber TempSupports printing without sealingCooling fan speedOffPrint speed30-120 mm/sRetraction distance1-3 mmRetraction speed1800-3600 mm/minRecommended Support MaterialFusFree™ S-Multi Quick-Remove SupportDrying setting100-120℃ for 4-6hAnnealing80-100℃ for 4-8h |
|---|
| Temperature280 -- 320 ° calibre recomendado del zapato 0.4-1.0mmrecomendado build surface treatmentPEI or Coating with PVP glueBuild plate temperature60-80 °CChamber TempSupports printing without sealingCooling fan speedOffPrint speed30-120 mm/sRetraction distance1-3 mmRetraction speed1800-3600 mm/minRecommended Support MaterialFusFree™ S-Multi Quick-Remove SupportDrying setting100-120℃ for 4-6hAnnealing80-100℃ for 4-8h < / td > < / tr > < / tbody > < / table > < h3 > departamento de Tips < / h3 > < p > el departamento Tips: 1.Although the moisture absorption of PET material is very low, it is very sensitive to moisture. Printing after absorbing moisture will result in ozzing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the FusForce™️ PET-GF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. 2.After the material is damp, there will be more printing ozzing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 100-120℃ for 4-6h to restore the printing quality of FusForceTM PET-GF. 3.Phaetus hardened steel and above grade nozzles shall be selected, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block should no less than 12mm. After the printing, the printed part can be annealed to further improve the strength of FusForceTM PET-GF print part. Annealing conditions: place the printed part at 80-100℃ for 4-8 hours and cool to room temperature naturally.
No matching print profile files.
PRODUCT PARAMETERS V2
Parámetros de impresiónValores sincronizados desde el perfil de producto V2 vinculado; punto de partida para el slicing y pruebas de impresión. Printing WindowCore temperature, speed and cooling settings from Product Parameters V2.
Nozzle Temperature
280 - 320 °C
Bed Temperature
80 - 100 °C
Print Speed
30 - 120 mm/s
Suggested Nozzle
0.4 - 1 mm
Hardware & PlatformNozzle, build plate and pre-print preparation recommendations.
Build Plate Material
PEI or Coating with PVP glue
Support & CompatibilitySupport material, spacing and compatible material recommendations.
Raft Gap
0.08 - 0.12 mm
Retraction
0.4 - 1 mm
Retraction Speed
30 - 60 mm/s
Application cases for this filament
Live listings from the Application Cases section (same taxonomy as the CMS).
1 cases
No FAQs for this product yet. 通用安全提示（FusRock）
耗材（防潮）储存要求
耗材受潮处理方案及方法
烘干参数 PTC 小型烘干盒：60–70℃，烘干 4–6 小时。 小型恒温鼓风烘干机：箱内温度场往往不均匀，可能导致料盘变形；此类设备上建议适当降低温度并缩短单次烘干时间（示例：40–45℃，约 4 小时），并结合材料详情中的干燥建议综合判断。 重要：若按此温度烘干后打印效果仍无改善，请先用空料盘做温度测试，再酌情提高烘干温度，以防温度过高或不均匀导致料盘烘干变形。 大型恒温鼓风烘干机：60–70℃，烘干 4–6 小时。 PS：为什么不同烘干设备适用温度会有差别？可在后台插入说明或外链「点击了解」。 注意事项 ⚠ 操作前请阅读
（可插入「变形 vs 正常」料盘对比照片，注意控制烘干温度与摆放方式。） 干燥受潮对比 耗材受潮的影响
（可插入 RH80% 环境下拆封后第 1 / 2 / 3 天打印同一模型的对比图。） * 上述吸湿对比示例可能因产品系列而异（例如 PAHT-CF），请在插入图片时于脚注中注明材料系列。 Fusrock® 3D printing filaments are suitable for general printing applications and have been tested under standard conditions. However, the performance and safety of printed products are influenced by multiple factors, including printing parameters, model design, operating environment, and intended use. By using Fusrock® materials, users acknowledge and agree to independently evaluate the suitability of printed items for their specific applications and assume all associated risks. Fusrock® shall not be held liable for any damages, injuries, or losses resulting from the practical use of products printed with its materials, including but not limited to structural failures, malfunctions, or safety hazards in operational environments. Thorough testing must be conducted before applying printed components to critical, functional, or commercial scenarios. Fusrock® products are not certified for medical, aerospace, or life-support systems, except for certifications explicitly stated by Fusrock® for specific materials.
Copyright & Terms of Use Notice
Thank you for visiting our website! Please carefully read the following Copyright Statement and Terms of Use before using this website: Copyright Statement All content on this website, including but not limited to texts, images, graphics, audios, videos, software, as well as their compilations, codes and technical architectures (collectively referred to as the "Content"), are owned by this website or relevant right holders and protected by the Copyright Law of the People's Republic of China and other applicable laws and regulations. Without the prior written authorization of this website, no entity or individual may copy, repost, disseminate, modify, display, adapt, mirror, upload, download or otherwise use the Content of this website in any form. The copyright of any third-party content quoted on this website shall belong to the original right holders. If your legitimate rights and interests are infringed due to reasons not attributable to this website, please contact us promptly, and we will handle the matter immediately upon verification. Terms of Use You may browse, download or print the Content of this website for non-commercial purposes in compliance with relevant laws, regulations and this Notice, provided that all copyright notices and other proprietary information are retained without any modification whatsoever. Any commercial use of the Content or services of this website is strictly prohibited, including but not limited to creating derivative works based on the Content, selling or distributing the Content to third parties. It is prohibited to use automated tools (such as crawlers, robots, etc.) to obtain, copy, monitor or attempt to access the content or data of this website. Disclaimer This website endeavors to provide accurate and reliable information, but makes no express or implied warranties regarding the completeness, timeliness or accuracy of the Content. This website shall not be held legally liable for any direct or indirect losses arising from your use of the Content or services of this website. This website may contain links to third-party websites, and this website assumes no responsibility for the content and acts of any third-party websites. Rights Protection If you violate this Notice and infringe upon the legitimate rights and interests of this website, we reserve the right to pursue legal liabilities, including but not limited to filing a lawsuit or taking other legal measures. Should you have any inquiries regarding this Notice, please contact us via: [email protected] The final right of interpretation of this Notice belongs exclusively to this website.  
|
