Synced from Product Parameters V2: Basic & Appearance
| recommended printingconditions | nozzle temperature250-270 ° crecommended nozzle diameter0.4-1.0 mmrecommended build surfacepvp gluebuild plate temperature100-110° cchamber tempsealing or 40-70° ccooling fanprint speed30-120 mm/sretraction distance1-3 mmretraction speed1800-3600 mm/minrecommended supportmaterialfusfree ™ s-멀티 quick-remove supportdrying setting70℃ for4~6 hannealingn/a |
|---|
| nozzle temperature250-270 ° crecommended nozzle diameter0.4-1.0 mmrecommendedbuild surface treatmentpei 또는 coating with pvp gluebuild plate temperature100-110° cchamber tempsealing 또는 40-70° ccoolingprint speed30-120 mm/sretraction distance1-3 mmretraction speed1800-3600 mm/minrecommended supportmaterialfusfree ™ s-멀티 quick-remove supportdrying setting70℃ for4-6 hannealingn/a |
printing tips:fuscoating ™ nexabs-cf20 has a higher fiber content compared with ordinary abs-gf/cf.이 기술은 improvesthe warping resistance and rigidity of abs materials챔버 temperature can properly reduced to achieve energy saving. if the filament has been opened for a longtime and problems such as air bubbles and stringing appear during the printing process.4~6 ° c에서 filament dry please. 이것은 잘 설계된 환경의 프린터에 recommended to the well-ventilated environment이다fuscoating ™ nexabs cf25 can maintain a core skin structure from the에서 extrudedmelt polymer is ina laminar state when it flows stably, however, the mechanism on the melt polymer is ina laminar state.when the printing speed is too high, the melt flow state will become unstable,the filaments extruded from the nozzle will no longer have the skin-core structure anymore.when이 phenomenon occurs, which can the rough surface of the printed part.프린팅 temperature increase 또는 extrusion speed reduce. 파투스 (phaetus)를 recommended to use"hardened steel resistance or nozzles with greater abrasion resistance, which can effec"
No matching print profile files.
연결된 제품 파라미터 V2의 값으로, 슬라이싱 및 시험 인쇄의 출발점이 됩니다.
Core temperature, speed and cooling settings from Product Parameters V2.
Nozzle, build plate and pre-print preparation recommendations.
Support material, spacing and compatible material recommendations.
Additional guidance maintained in Product Parameters V2.
No solution entries for this product yet.
No FAQs for this product yet.
通用安全提示（FusRock）
| Short breaks | Store in a sealed dry box or apply a simple vacuum pack; avoid direct sunlight. |
|---|---|
| Long-term storage | Return filament to the factory foil bag, squeeze out air (add a fresh desiccant pack if available), then place inside a household vacuum bag and pull vacuum. Keep in a cool, dry place away from sunlight. |
PTC compact dryer box: 60–70 °C for 4–6 hours.
Small lab oven (forced-air): temperature uniformity is often limited; spools can warp. Reduce temperature/time (example: 40–45 °C for ~4 hours) and cross-check the material-specific drying notes in the datasheet.
Important: if print quality does not improve, test with an empty spool before raising temperature—non-uniform heat can deform plastic flanges.
Large forced-air oven: 60–70 °C for 4–6 hours.
PS: Why do devices differ? Add an internal article or external link (“learn more”).
⚠ Read before drying
(Insert “warped vs normal” spool photos here.)
What moisture does to prints
| Dry | Damp |
|---|---|
| Cleaner surface, stable color, mechanical properties on spec | Pitting, stringing, whitening, weaker properties (material dependent) |
(Optional: 1 / 2 / 3 day exposure at ~80% RH — same test part.)
* Example photos may reference a specific grade (e.g. PAHT-CF); label yours accordingly.
