FusCoating™NexFusFun™asa-cf20です

FusCoatingシリーズ

FusCoating™NexFusFun™asa-cf20です

nexabs-cf20です

FusCoating™NexFusFun™asa-cf20は、20%のカーボンファイバー補強FusFun™ABS 3Dプリントワイヤーです。線材の外層は高い接着強度の純粋なFusFun™ABS樹脂で、線材の内芯は20%短く切って炭素繊維を強化したFusFun™ABS樹脂です。FusCoating™FusCoating™NexFusFun™asa-cf20 3Dプリントクラスタ線材は、押し出し過程で一般的に層流運動する高分子溶融体の特性を利用して、プリンタのノズルを通過した後も安定した2層クラスタ構造を維持します。印刷時のZ軸層間方向は常に外層の純正樹脂のままに保つことができます

正規チャネル / 販売代理店 Procurement

Unannealed83

HDT-A / degC

Unannealed9

HDT-B / degC

- Young's Modulus / MPa

47.86 Tensile Strength / MPa

Diameter175mm Weight2.5个、3个、kg

Spool Info

材料の機能特性(物性表とレーダー対比)を載せています…

製品パラメータ V2

FusCoating™NexABS-CF20

Synced from Product Parameters V2: Basic & Appearance

Product Name FusCoating™NexABS-CF20

Product Model NexABS-CF20

Forming Process FDM化フィラメント

Color / Appearance 黑色（Black）

Package Weight 2.5个、3个、

Filament Diameter 175 mm

Brand FusRock

Supplier FusRock

Material Properties

Recommended printingconditions	Nozzle temperature250-270°CRecommended Nozzle Diameter0.4-1.0 mmRecommended build surfaceの中ですtreatmentPEI orCoating with PVP glueBuild plate temperature100-110°CChamber TempSealing or 40-70°CCooling fanspeed0-20%Printspeed30-120 mm/sRetraction distance1-3 speed1800-3600 mm/minRecommended SupportMaterialFusFree™s-multiquick-remove SupportDrying setting70℃for4-6 hannealingn /A

Recommended printingconditions

	Nozzle temperature250-270°CRecommended NozzleDiameter0.4-1.0 mmRecommendedbuild surface treatmentPEI or Coating with PVP glueBuild plate temperature100-110°CChamberCCoolingfan speed0-20%Print speed30-120 mm/sRetraction distance1-3 mmRetraction speed1800-3600mm/minRecommended SupportMaterialFusFree™s-multi quick-remove SupportDryingですsetting70℃for4-6 hannealingn /A

Printing Tips

Printing Tips:FusCoating™nexabs-cf20 hasa higher fiber content compared with ordinary abs-gf /CF. This technology further improvesthe warping resistance andso the chamber temperature can be properly reduced to achieve energy saving.If the filamenthas been opened for a longtime and problems such as air bubbles and stringing appear during the printing processですdry the filament at 60-70°C for 4-6 hours.It is recommended to place the printer in a well-ventilated environmentwhenprinting with ABS material.FusCoating™nexabs-cf25 can maintain a core-skin structure when extruded from thenozzle.it isbased on the mechanism that the melt polymer is ina laminar state when It flows stably,However,when the printing speed is too highですthe melt flow state will become unstable,and the filaments extruded from the nozzle will no longer have the skin-corestructure anymore,which can cause the rough surface of the printed part. When this phenomenon occurs,it is recommendedto increase the printing temperature or reduce the extrusion speed. it is recommended to use Phaetushardened steelnozzles or nozzles with greater abrasion resistance, which can effec

資料種別

バージョン

日時

アクション

TDS

5.2

2025-02-01

一致するプリント設定ファイルはありません。

製品パラメータ V2

プリントパラメータ

関連する製品パラメータ V2 の値を表示。スライシングと試作の出発点としてご利用ください。

Printing Window

Core temperature, speed and cooling settings from Product Parameters V2.

Nozzle Temperature 250 - 280 °C

Bed Temperature 100 - 110 °C

Chamber Temperature 40 - 60 °C

Print Speed 30 - 200 mm/s

Suggested Nozzle 0.4 - 1 mm

Hardware & Platform

Nozzle, build plate and pre-print preparation recommendations.

Nozzle Material 硬化鋼と同等以上の硬度を有する材料

Build Plate Material peiまたはpvp接着剤でコーティング

Enclosure Printing カートンを密封し、倉庫の温度を上げて印刷してください。

Support & Compatibility

Support material, spacing and compatible material recommendations.

Support Material FusFree™ S-Multi S-Multi · ++

Raft Gap 0.18 - 0.2 mm

Retraction 1 - 3 mm

Retraction Speed 30 - 60 mm/s

Notes

Additional guidance maintained in Product Parameters V2.

Other Suggestions fuscoating™nexabs-cf20は、通常のabs-gf / cfと比較して繊維含有量が高い。本技術により、abs材料の反り抵抗性と剛性をさらに向上させ、チャンバー温度を適切に下げることで省エネルギーを実現します。フィラメントを長時間開いた状態で印刷中に気泡や糸張りなどの問題が発生した場合は、フィラメントを60 ~ 70°cで4 ~ 6時間乾燥させてください。 abs素材で印刷する場合は、通気性の良い場所に設置することをお勧めします。 fuscoating™nexabs-cf25はノズルから押し出されたときにコアスキン構造を維持することができる。機構は融けポリマーが凌れた状態である据置状態で安定的に流れたら、しかし、印刷速度が高すぎるが溶けフロー状態が不安定になる见込みとノズルからフィラメント押し出し品はもはやskin-core構造必要もなくなりましたでこぼこした表面である印刷を起こす。この現象が発生した場合は、印刷温度を上げるか、押出速度を下げることをお勧めします。 phaetusの硬化鋼ノズルまたは耐摩耗性の高いノズルを使用することをお勧めします。加熱ブロックの厚さは12mm以上にすることをお勧めします。

この製品のソリューション項目はまだありません。

この製品の FAQ はまだ登録されていません。

通用安全提示（FusRock）

长期大量使用 3D 打印材料时，建议在专用房间操作并保持通风。
有过敏史者请确认所用材质不会引发过敏反应。
有呼吸道慢性病者请佩戴口罩；其他人员也强烈建议操作时佩戴口罩。
对纤维类打印件进行打磨、切割等可能产生纤维逸出的操作时，请做好防护，避免刺入或吸入。
打印时请远离儿童与婴幼儿，注意环境安全。

Storage (moisture protection)

Short breaks	Store in a sealed dry box or apply a simple vacuum pack; avoid direct sunlight.
Long-term storage	Return filament to the factory foil bag, squeeze out air (add a fresh desiccant pack if available), then place inside a household vacuum bag and pull vacuum. Keep in a cool, dry place away from sunlight.

Drying damp filament — guidelines

Drying parameters

PTC compact dryer box: 60–70 °C for 4–6 hours.

Small lab oven (forced-air): temperature uniformity is often limited; spools can warp. Reduce temperature/time (example: 40–45 °C for ~4 hours) and cross-check the material-specific drying notes in the datasheet.

Important: if print quality does not improve, test with an empty spool before raising temperature—non-uniform heat can deform plastic flanges.

Large forced-air oven: 60–70 °C for 4–6 hours.

PS: Why do devices differ? Add an internal article or external link (“learn more”).

Precautions

⚠ Read before drying

When in doubt, run an empty-spool temperature trial before increasing heat.
Follow the recommended temperatures/times from the product / material admin page.
Prefer forced-air ovens; do not blast the spool directly with hot air.
Avoid exposing the spool edge to a violent air jet.
Do not rest spools only on wire racks—use a flat heat-spreading plate if needed.
Hot spools can burn—use gloves.
Observe fire and electrical safety.
Avoid microwave ovens or other uneven heaters; a temperature-controlled drying oven is preferred.

(Insert “warped vs normal” spool photos here.)

Dry vs damp

What moisture does to prints

Dry	Damp
Cleaner surface, stable color, mechanical properties on spec	Pitting, stringing, whitening, weaker properties (material dependent)

(Optional: 1 / 2 / 3 day exposure at ~80% RH — same test part.)

* Example photos may reference a specific grade (e.g. PAHT-CF); label yours accordingly.

fusrock®3 dプリントフィラメントは、一般的な印刷アプリケーションに適しており、標準的な条件下でテストされています。しかしながら、印刷製品の性能や安全性は、印刷パラメータ、モデル設計、使用環境、使用目的など、複数の要因に左右されます。fusrock®素材を使用することにより、ユーザーは、特定のアプリケーションに対する印刷アイテムの適合性を独自に評価し、関連するすべてのリスクを引き受けることを認め、同意します。fusrock®は、その材料が印刷された製品の実用的な使用に起因するいかなる損害、負傷、損失に対しても責任を負いません。印刷されたコンポーネントを重要な、機能的、または商業的なシナリオに適用する前に、徹底的なテストを実施する必要があります。fusrock®製品は、特定の材料についてfusrock®が明示的に述べている認証を除き、医療、航空宇宙、または生命維持システムの認証を受けていません。

Copyright & Terms of Use Notice
Thank you for visiting our website! Please carefully read the following Copyright Statement and Terms of Use before using this website:
Copyright Statement
All content on this website, including but not limited to texts, images, graphics, audios, videos, software, as well as their compilations, codes and technical architectures (collectively referred to as the "Content"), are owned by this website or relevant right holders and protected by the Copyright Law of the People's Republic of China and other applicable laws and regulations.
Without the prior written authorization of this website, no entity or individual may copy, repost, disseminate, modify, display, adapt, mirror, upload, download or otherwise use the Content of this website in any form.
The copyright of any third-party content quoted on this website shall belong to the original right holders. If your legitimate rights and interests are infringed due to reasons not attributable to this website, please contact us promptly, and we will handle the matter immediately upon verification.
Terms of Use
You may browse, download or print the Content of this website for non-commercial purposes in compliance with relevant laws, regulations and this Notice, provided that all copyright notices and other proprietary information are retained without any modification whatsoever.
Any commercial use of the Content or services of this website is strictly prohibited, including but not limited to creating derivative works based on the Content, selling or distributing the Content to third parties.
It is prohibited to use automated tools (such as crawlers, robots, etc.) to obtain, copy, monitor or attempt to access the content or data of this website.
Disclaimer
This website endeavors to provide accurate and reliable information, but makes no express or implied warranties regarding the completeness, timeliness or accuracy of the Content.
This website shall not be held legally liable for any direct or indirect losses arising from your use of the Content or services of this website.
This website may contain links to third-party websites, and this website assumes no responsibility for the content and acts of any third-party websites.
Rights Protection
If you violate this Notice and infringe upon the legitimate rights and interests of this website, we reserve the right to pursue legal liabilities, including but not limited to filing a lawsuit or taking other legal measures.
Should you have any inquiries regarding this Notice, please contact us via: [email protected]
The final right of interpretation of this Notice belongs exclusively to this website.