Italiano (IT)
Italiano (IT)

prodotti
Serie FusFun

FusFun™ ASA

ASA

FusFun ™ ASA è comma 3D eccellenti proprietà materiali di sintesi, la natura e le caratteristiche meccaniche dei materiali si avvicina ABS, con un basso l’odore e caratteristiche di resistenza agli uv invecchiando, possono sostituire ABS e applicato all’ambiente all’aperto. FusFun ™ ASA con FusFree ™ S riuniscono Quick materiale - Remove Support facilmente cedere alla base dei materiali rapida soluzione modelli complessi -apparecchi di formatura rompicapo meno efficaci.
Official channels / sales reps Procurement
Unannealed83
HDT-A / degC
Unannealed93
HDT-B / degC
2317 Young's Modulus / MPa
- Tensile Strength / MPa
Diameter1.75mm Weight1kg
Spool Info
  • Specifications
  • Print profile downloads
  • Parametri di stampa
  • Related downloads
  • Application cases
  • FAQ
  • Health tips
  • Moisture handling & storage
  • Application disclaimer
  • Statements & copyright
PRODUCT PARAMETERS V2

FusFun™ ASA

Synced from Product Parameters V2: Basic & Appearance

Product Name FusFun™ ASA
Product Model ASA
Forming Process FDM Compatible Filament
Color / Appearance 纯色（Natural）、白色（White）、黑色（Black）、红色（Red）、黄色（Yellow）、灰色（Grey）、蓝色（Blue）
Package Weight 1 kg
Filament Diameter 1.75 mm
Brand FusRock
Supplier FusRock

Material Properties

Recommended printing Condizioni < / th > < > td Nozzle Temperature240-260 ° CRecommended Nozzle h ≥ 0,2 mmRecommended build surface TreatmentGlass, vuchi Film or PC FilmBuild piastra temperature100-110 ° CChamber TempSealing or 60-80 ° CCooling mechen, speed0-30%Print speed30-120 mm/sRetraction distance1-5 mmRetraction speed1800-3600 mm/minRecommended Support MaterialFusFree™ S-Multi Quick-Remove SupportDrying setting70℃ for 5-6hAnnealingN/A

Recommended printing conditions

< tbody > < tr > < i > < / th > < > td Nozzle Temperature240-260 ° CRecommended Nozzle h ≥ 0,2 mmRecommended build Surface treatmentGlass, vuchi Film or PC FilmBuild piastra temperature100-110 ° CChamber TempSealing or 60-80 ° CCooling mechen, speed0-30%Print speed30-120 mm/sRetraction distance1-5 mmRetraction speed1800-3600 mm/minRecommended Support MaterialFusFree™ S-Multi Quick-Remove SupportDrying setting70℃ for 1.Compared with PLA and PETG filaments, ASA needs a higher environment temperature to release the residual stress during printing. Please keep the chamber closed to avoid warping and layer separation issuesduring the process. If your printer has a heated enclosure already, please keep the chamber temperature between 60-80°C.2.If you find the printing quality decreases after ASA has been exposed in the air for a long time, please dry the filament at 70-80°C for 4-6h. Recommended printing conditions​

  • Document type
  • Version
  • Time
  • Action
  • TDS
  • 5.1
  • 2023-07-01

    • No matching print profile files.

    PRODUCT PARAMETERS V2

    Parametri di stampa

    Valori sincronizzati dal profilo prodotto V2 collegato — punto di partenza per slicing e prove di stampa.

    Printing Window

    Core temperature, speed and cooling settings from Product Parameters V2.

    Nozzle Temperature 240 - 260 °C
    Bed Temperature 100 - 110 °C
    Print Speed 30 - 120 mm/s
    Suggested Nozzle 0.2 - 0.2 mm
    Cooling Fan 30 %

    Hardware & Platform

    Nozzle, build plate and pre-print preparation recommendations.

    Build Plate Material 玻璃、PEI膜或PC膜

    Support & Compatibility

    Support material, spacing and compatible material recommendations.

    Raft Gap 0.16 - 0.18 mm
    Retraction 1 - 5 mm
    Retraction Speed 30 - 60 mm/s
    Application cases for this filament Live listings from the Application Cases section (same taxonomy as the CMS).
    1 cases
    Aeromodelli RC 2026-05-09

    Cas d’application aéromodèle d’été

    FusRock 3D printing materials in the RC Planes segment, illustrated by “Summer model aviation application”, balancing structural strength, print fidelity and field reliability.

    No FAQs for this product yet.

    通用安全提示（FusRock）

    1. 长期大量使用 3D 打印材料时，建议在专用房间操作并保持通风。
    2. 有过敏史者请确认所用材质不会引发过敏反应。
    3. 有呼吸道慢性病者请佩戴口罩；其他人员也强烈建议操作时佩戴口罩。
    4. 对纤维类打印件进行打磨、切割等可能产生纤维逸出的操作时，请做好防护，避免刺入或吸入。
    5. 打印时请远离儿童与婴幼儿，注意环境安全。

    耗材（防潮）储存要求

    短期不使用时 放入密封防潮盒或进行简易抽真空即可，避免阳光直射。
    长期不使用 将耗材放入出厂铝箔袋并尽量排出袋内空气（条件允许时在袋内再放一包干燥干燥剂）；外套一层家用抽真空保鲜袋后抽真空。置于阴凉干燥处，避免阳光直射。
    耗材受潮处理方案及方法
    烘干参数

    PTC 小型烘干盒：60–70℃，烘干 4–6 小时。

    小型恒温鼓风烘干机：箱内温度场往往不均匀，可能导致料盘变形；此类设备上建议适当降低温度并缩短单次烘干时间（示例：40–45℃，约 4 小时），并结合材料详情中的干燥建议综合判断。

    重要：若按此温度烘干后打印效果仍无改善，请先用空料盘做温度测试，再酌情提高烘干温度，以防温度过高或不均匀导致料盘烘干变形。

    大型恒温鼓风烘干机：60–70℃，烘干 4–6 小时。

    PS：为什么不同烘干设备适用温度会有差别？可在后台插入说明或外链「点击了解」。

    注意事项

    ⚠ 操作前请阅读

    1. 没有把握的请先用空料盘进行温度测试，以防温度过高或不均匀导致料盘烘干变形。
    2. 请严格遵循材料详情页 / 材料参数管理中推荐的烘干温度与时间。
    3. 建议使用鼓风干燥箱；不要让出风口直吹料盘（避免局部过热变形）。
    4. 烘干时注意避开强气流直吹线盘侧面。
    5. 勿将料盘直接搁在网状架子上（建议垫底金属板等平整受热面）。
    6. 取出高温料盘时注意烫伤。
    7. 注意防火与用电安全。
    8. 尽量选用箱内温度均匀的设备；避免使用家用微波炉等加热严重不均的方式；更推荐恒温鼓风干燥箱类设备。

    （可插入「变形 vs 正常」料盘对比照片，注意控制烘干温度与摆放方式。）

    干燥受潮对比

    耗材受潮的影响

    未受潮受潮
    表面相对整洁、颜色正常、力学性能在规格内可能出现痘痕/毛刺/拉丝、颜色发白、力学性能下降等（因材料而异）

    （可插入 RH80% 环境下拆封后第 1 / 2 / 3 天打印同一模型的对比图。）

    * 上述吸湿对比示例可能因产品系列而异（例如 PAHT-CF），请在插入图片时于脚注中注明材料系列。

    No application disclaimer to display yet. Link a Product Parameters V2 record to this product in the admin.

    Copyright & Terms of Use Notice
    Thank you for visiting our website! Please carefully read the following Copyright Statement and Terms of Use before using this website:
    Copyright Statement
    All content on this website, including but not limited to texts, images, graphics, audios, videos, software, as well as their compilations, codes and technical architectures (collectively referred to as the "Content"), are owned by this website or relevant right holders and protected by the Copyright Law of the People's Republic of China and other applicable laws and regulations.
    Without the prior written authorization of this website, no entity or individual may copy, repost, disseminate, modify, display, adapt, mirror, upload, download or otherwise use the Content of this website in any form.
    The copyright of any third-party content quoted on this website shall belong to the original right holders. If your legitimate rights and interests are infringed due to reasons not attributable to this website, please contact us promptly, and we will handle the matter immediately upon verification.
    Terms of Use
    You may browse, download or print the Content of this website for non-commercial purposes in compliance with relevant laws, regulations and this Notice, provided that all copyright notices and other proprietary information are retained without any modification whatsoever.
    Any commercial use of the Content or services of this website is strictly prohibited, including but not limited to creating derivative works based on the Content, selling or distributing the Content to third parties.
    It is prohibited to use automated tools (such as crawlers, robots, etc.) to obtain, copy, monitor or attempt to access the content or data of this website.
    Disclaimer
    This website endeavors to provide accurate and reliable information, but makes no express or implied warranties regarding the completeness, timeliness or accuracy of the Content.
    This website shall not be held legally liable for any direct or indirect losses arising from your use of the Content or services of this website.
    This website may contain links to third-party websites, and this website assumes no responsibility for the content and acts of any third-party websites.
    Rights Protection
    If you violate this Notice and infringe upon the legitimate rights and interests of this website, we reserve the right to pursue legal liabilities, including but not limited to filing a lawsuit or taking other legal measures.
    Should you have any inquiries regarding this Notice, please contact us via: [email protected]
    The final right of interpretation of this Notice belongs exclusively to this website.
  • Email：[email protected]
    • Links
    Chi siamo Prodotti Casi applicativi Notizie Download FAQ Lavora con noi Contatti Server Status
    More media
    • Copyright © 2026 FusRock tutti i diritti riservati
    Termini di utilizzo Informativa sulla privacy Informativa sui cookie Impostazioni cookie Italy | Italiano (IT)
    Contact form

    Invia