同步自产品参数管理V2:基础与外观信息
| Recommended printing conditions | Nozzle Temperature250-270 °CRecommended Nozzle Diameter≥0.2 mmRecommended build surface treatmentPEI or Coating with PVP glueBuild plate temperature80-90 °CChamber TempSealing or 40-70°CCooling fan speed0-30 %Print speed30-150 mm/sRetraction distance1-5 mmRetraction speed1800-3600 mm/minDrying setting70℃ for 4-6hAnnealingN/A |
|---|
Printing Tips:1. Compared with PLA, PETG and other materials, FusFun™ ABS materials need a higher chamber temperature to help release the residual stress during the printing process. Please keep the printer chamber closed during the printing process. It can effectively avoid printed parts from warping and cracking. If the device has a heated chamber, it is recommended to set the temperature of heated chamber between 40-60°C.2. If the FusForce™ FusFun™ ABS-ESD filament has been unpacked for a long time and the printing quality starts to degrade during the printing process, please dry the filament at 70-80°C for 4-6 hours before printing.3. Although FusForce™ FusFun™ ABS-ESD has much less odor compared with similar products, it is still recommended to place the printer in a well-ventilated area during printing.
暂无匹配的打印配置文件。
以下参数同步自关联的产品参数管理V2,可作为切片与试打调参的起点。
同步自产品参数管理V2的温度、速度与冷却建议。
喷嘴、底板以及打印前准备建议。
支撑材料、支撑间距和兼容耗材建议。
暂无收录的解决方案条目,敬请期待。
暂无收录的常见问题,敬请期待。
通用安全提示(FusRock)
| 短期不使用時 | 放入密封防潮盒或進行簡易抽真空即可,避免陽光直射。 |
|---|---|
| 長期不使用 | 將耗材放入出廠鋁箔袋並盡量排出袋內空氣(條件允許時在袋內再放一包幹燥幹燥劑);外套一層家用抽真空保鮮袋後抽真空。置於陰涼幹燥處,避免陽光直射。 |
PTC 小型烘幹盒:60–70℃,烘幹 4–6 小時。
小型恒溫鼓風烘幹機:箱內溫度場往往不均勻,可能導致料盤變形;此類設備上建議適當降低溫度並縮短單次烘幹時間(示例:40–45℃,約 4 小時),並結合材料詳情中的幹燥建議綜合判斷。
重要:若按此溫度烘幹後打印效果仍無改善,請先用空料盤做溫度測試,再酌情提高烘幹溫度,以防溫度過高或不均勻導致料盤烘幹變形。
大型恒溫鼓風烘幹機:60–70℃,烘幹 4–6 小時。
PS:為什麼不同烘幹設備適用溫度會有差別?可在後臺插入說明或外鏈「點擊了解」。
⚠ 操作前請閱讀
(可插入「變形 vs 正常」料盤對比照片,注意控制烘幹溫度與擺放方式。)
耗材受潮的影響
| 未受潮 | 受潮 |
|---|---|
| 表面相對整潔、顏色正常、力學性能在規格內 | 可能出現痘痕/毛刺/拉絲、顏色發白、力學性能下降等(因材料而異) |
(可插入 RH80% 環境下拆封後第 1 / 2 / 3 天打印同一模型的對比圖。)
* 上述吸濕對比示例可能因產品系列而異(例如 FusForce™ FusForce™ PAHT-CF),請在插入圖片時於腳注中注明材料系列。
暂无可展示的应用免责声明。请先在后台为该产品的「关联产品参数V2」选择或匹配记录。