PAHT is specially developed for FDM 3D printing process, and its substrate material is high temperature nylon, which has low density, low moisture absorption, high strength, high abrasion resistance, excellent chemical resistance and high heat resistance. It also has good dimensional stability, no warpage and no shrinkage during the printing process, and can be used with FusFree™ S-PAHT Quick-Remove Support material to solve the problem of poor molding effect on the support surface of complex models.
Destaques do produto
Low Mositure Sensitivity
FusForce™ PAHT based on modified high temperature nylon, whose saturated moisture absorption rate is only one fifth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.
Super Abrasive Resistance
FusForce™ PAHT has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.
Apresentação do produto
PAHT is specially developed for FDM 3D printing process, and its substrate material is high temperature nylon, which has low density, low moisture absorption, high strength, high abrasion resistance, excellent chemical resistance and high heat resistance. It also has good dimensional stability, no warpage and no shrinkage during the printing process, and can be used with FusFree™ S-PAHT Quick-Remove Support material to solve the problem of poor molding effect on the support surface of complex models.
Detalhes do produto
| Parâmetro | Valor / intervalo |
|---|---|
| Color | Natrual, Black |
| Filament Ø | 1.75 mm |
| Peso líquido | 1 kg |
Propriedades do material
Propriedades físicas
| Propriedade | Método de ensaio | Valor típico |
|---|---|---|
| Density | ISO 1183 | 1.21 g/cm³ |
| Water absorption | ISO 62: Method 1 | 2.59 % |
| Melting temperature | ISO 11357 | 231 °C |
| Melt index | - | 280 g/10min |
Propriedades térmicas
| Propriedade | Método de ensaio | Unidade | Dry Condition | Saturation hygroscopic conditions | Recozido + condicionamento de humidade |
|---|---|---|---|---|---|
| HDT A | ISO 75: Method A (1.80 MPa) | °C | 72.5 | 48 | - |
| HDT B | ISO 75: Method B (0.45 MPa) | °C | 79.6 | 60.0 | - |
Propriedades mecânicas
| Propriedade | Método de ensaio | Unidade | Dry Condition | Saturation hygroscopic conditions | Recozido + condicionamento de humidade |
|---|---|---|---|---|---|
| Tensile Strength XY | ISO527 | MPa | 69.29 ± 1.17 | 57.63 ± 2.14 | - |
| Tensile Modulus XY | ISO527 | MPa | 3329.72 ± 235.60 | 2896.78 ± 152.93 | - |
| Elongation at Break XY | ISO527 | % | 9.77 ± 1.68 | 50 | - |
| Flexural Strength XY | ISO178 | MPa | 112.64 ± 1.60 | 82.23 ± 7.36 | - |
| Flexural Modulus XY | ISO178 | MPa | 3202.24 ± 115.78 | 2408.32 ± 274.58 | - |
| Notched Impact XY | ISO179 | kJ/m² | 9.74 ± 0.84 | 13.10 ± 1.70 | - |
| Tensile Strength Z | ISO527 | MPa | - | 0.6 | - |
Parâmetros de impressão da amostra:Specimens printed under the following conditions: Nozzle temp 280°C, Bed temp 80°C, Print speed 45mm/s, Infill 100%, Infill angle ±45°
Aviso legal
—
