FusForce™ ABS-ESD is an ESD-safe filament based on multiwalled carbon nanotube -filled ABS. Thanks to its excellent printability and electrostatic dissipative properties, ABS-ESD is ideal for general manufacturing and electronic industry. The main raw material of FusForce™ ABS-ESD is an ABS resin synthesized by continuous bulk polymerization technique. Thanks to this advanced production process, the residual amount of solvents and monomers used in the production process in the final ABS product is so low that the filament has a low odor during printing.
Product highlights
低气味
Odorless
可控表面电阻率
Controllable surface resistivity
The surface resistivity of the printed part fall in the range of ESD-safe or dissipative material category (105 to 109Ω/sq).
Product introduction
FusForce™ ABS-ESD is an ESD-safe filament based on multiwalled carbon nanotube -filled ABS. Thanks to its excellent printability and electrostatic dissipative properties, ABS-ESD is ideal for general manufacturing and electronic industry. The main raw material of FusForce™ ABS-ESD is an ABS resin synthesized by continuous bulk polymerization technique. Thanks to this advanced production process, the residual amount of solvents and monomers used in the production process in the final ABS product is so low that the filament has a low odor during printing.
Product details
| Parameter | Value / range |
|---|---|
| Color | Black |
| Filament Ø | 1.75 mm |
| Net weight | 1 kg |
Material properties
Physical properties
| Property | Test method | Typical value |
|---|---|---|
| Density | ISO 1183 | 1.05 g/cm³ |
| Melt index | - | 280 g/10min |
| Glass transition temperature | ISO 11357 | 80 °C |
Thermal properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| - | |||
Mechanical properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| Tensile Break Strength XY | ISO527 | MPa | 34.00 ± 0.16 |
| Elongation at Break XY | ISO527 | % | 2.21 ± 0.08 |
| Flexural Strength XY | ISO178 | MPa | 54.28 ± 0.56 |
| Flexural Modulus XY | ISO178 | MPa | 2337.91 ± 20.62 |
| Notched Impact XY | ISO179 | kJ/m² | 6.47 ± 0.6 |
| Tensile Strength Z | ISO527 | MPa | 19.38 ± 0.16 |
| Tensile Modulus Z | ISO527 | MPa | 1759.74 ± 55.60 |
| Elongation at Break Z | ISO527 | % | 1.58 ± 0.09 |
Printed specimen parameters:Specimens printed under the following conditions: Nozzle size 0.4mm，Nozzle temp 260°C, Bed temp 80°C, Print speed 100mm/s, Infill 100%, Infill angle ±45°
Disclaimer
—
