FusFlex™ TPU-GF is a semi-rigid TPU 3D printing material filled with 15% chopped glass fibers, balancing good rigidity while maintaining a certain degree of flexibility. FusFlex™ TPU-GF offers excellent impact resistance and wear resistance, along with high heat resistance. It is easy to print, compatible with most extruders, and can be used in applications that partially replace ABS and in the production of components with high-impact resistance requirements.
Product highlights
-
Product introduction
FusFlex™ TPU-GF is a semi-rigid TPU 3D printing material filled with 15% chopped glass fibers, balancing good rigidity while maintaining a certain degree of flexibility. FusFlex™ TPU-GF offers excellent impact resistance and wear resistance, along with high heat resistance. It is easy to print, compatible with most extruders, and can be used in applications that partially replace ABS and in the production of components with high-impact resistance requirements.
Product details
| Parameter | Value / range |
|---|---|
| Color | White, Black |
| Filament Ø | 1.75 mm |
| Net weight | 1 kg |
Material properties
Physical properties
| Property | Test method | Typical value |
|---|---|---|
| Density | ISO 1183 | 1.32 g/cm³ |
| Melt index | - | 230 g/10min |
Thermal properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| - | |||
Mechanical properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| Tensile Modulus XY | ISO527 | MPa | 429.80 ± 15.82 |
| Tensile Break Strength XY | ISO527 | MPa | 30.92 ± 0.33 |
| Elongation at Break XY | ISO527 | % | 74.80 ± 7.80 |
| Flexural Strength XY | ISO178 | MPa | 14.47 ± 0.36 |
| Flexural Modulus XY | ISO178 | MPa | 395.89 ± 44.44 |
| Notched Impact XY | ISO179 | kJ/m² | 179 |
Printed specimen parameters:Specimens printed under the following conditions: Nozzle size 0.4mm，Nozzle temp 260°C, Bed temp 30°C, Print speed 120mm/s, Infill 100%, Infill angle ±45°
Disclaimer
Fusrock® 3D printing filaments are suitable for general printing applications and have been tested under standard conditions. However, the performance and safety of printed products are influenced by multiple factors, including printing parameters, model design, operating environment, and intended use. By using Fusrock® materials, users acknowledge and agree to independently evaluate the suitability of printed items for their specific applications and assume all associated risks. Fusrock® shall not be held liable for any damages, injuries, or losses resulting from the practical use of products printed with its materials, including but not limited to structural failures, malfunctions, or safety hazards in operational environments. Thorough testing must be conducted before applying printed components to critical, functional, or commercial scenarios. Fusrock® products are not certified for medical, aerospace, or life-support systems, except for certifications explicitly stated by Fusrock® for specific materials.
