FusFlex™ MD50
MD50 possesses properties very similar to those of traditional medical support plates, making it suitable for use in the printing of medical supports.
Product highlights
-
Product introduction
MD50 possesses properties very similar to those of traditional medical support plates, making it suitable for use in the printing of medical supports.
Product details
| Parameter | Value / range |
|---|---|
| Color | Natural |
| Filament Ø | 1.75 mm |
| Net weight | 2.5 / 3 kg |
Material properties
Physical properties
| Property | Test method | Typical value |
|---|---|---|
| Density | ISO 1183 | 1.10 g/cm³ |
| Melting temperature | ISO 11357 | 62 °C |
| Melt index | - | 200 g/10min |
Thermal properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| - | |||
Mechanical properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| Tensile Strength XY | ISO527 | MPa | 18 |
| Tensile Modulus XY | ISO527 | MPa | 842 |
| Elongation at Break XY | ISO527 | % | 30 |
| Flexural Strength XY | ISO178 | MPa | 23 |
| Flexural Modulus XY | ISO178 | MPa | 700 |
| Notched Impact XY | ISO179 | kJ/m² | 179 |
| Tensile Strength Z | ISO527 | MPa | 12 |
| Tensile Modulus Z | ISO527 | MPa | 330 |
| Elongation at Break Z | ISO527 | % | 30 |
Printed specimen parameters:Specimens printed under the following conditions: Nozzle temp 210℃, Bed temp 40℃, Print speed 60mm/s, Infill 100%, Infill angle ±45°
Disclaimer
—
— Page 1 of 1 —