FusFlex™ TPU90A-HF is TPU material that is easy to print. FusFlex™ TPU90A-HF is easier to be extruded than other conventional TPU consumables under the same hardness. When a suitable extruder is selected, FusFlex™ TPU90A-HF can support a printing speed of more than 100mm/s.
Product highlights
High flowability
FusRock ™ improved the fluidity of TPU material, so that the material can be easily pushed in the extruder with only a small thrust. High speed printing (≥100mm/s) can be easily realized by direct extruders, and conventional speed printing (30-60mm / s) can be realized by bowden extruders.
Product introduction
FusFlex™ TPU90A-HF is TPU material that is easy to print. FusFlex™ TPU90A-HF is easier to be extruded than other conventional TPU consumables under the same hardness. When a suitable extruder is selected, FusFlex™ TPU90A-HF can support a printing speed of more than 100mm/s.
Product details
| Parameter | Value / range |
|---|---|
| Color | White, Black, Bright Green |
| Filament Ø | 1.75 mm |
| Net weight | 1 kg |
Material properties
Physical properties
| Property | Test method | Typical value |
|---|---|---|
| Density | ISO 1183 | 1.16 g/cm³ |
| Water absorption | ISO 62: Method 1 | 1.62 % |
| Melt index | - | 190 g/10min |
Thermal properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| - | |||
Mechanical properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| Tensile Break Strength XY | ISO527 | MPa | 20.38 ± 1.06 |
| Elongation at Break XY | ISO527 | % | 831.87 ± 35.22 |
Printed specimen parameters:Specimens printed under the following conditions: Nozzle size 0.4mm，Nozzle temp 210°C, Bed temp 50°C, Print speed 60mm/s, Infill 100%, Infill angle ±45°
Disclaimer
Fusrock® 3D printing filaments are suitable for general printing applications and have been tested under standard conditions. However, the performance and safety of printed products are influenced by multiple factors, including printing parameters, model design, operating environment, and intended use. By using Fusrock® materials, users acknowledge and agree to independently evaluate the suitability of printed items for their specific applications and assume all associated risks. Fusrock® shall not be held liable for any damages, injuries, or losses resulting from the practical use of products printed with its materials, including but not limited to structural failures, malfunctions, or safety hazards in operational environments. Thorough testing must be conducted before applying printed components to critical, functional, or commercial scenarios. Fusrock® products are not certified for medical, aerospace, or life-support systems, except for certifications explicitly stated by Fusrock® for specific materials.
