FusFlex™ PEBA 95A is an easily printable nylon-based elastomer. It exhibits lower density, higher elasticity, improved low-temperature performance, and enhanced chemical resistance compared to TPU flexible materials.
Product highlights
高回弹性 Energy Return
FusFlex™ PEBA 95A delivers exceptional rebound performance, with a 3× higher rebound rate compared to FusFlex™ TPU95A-HF.
低密度 Light Weight
FusFlex™ PEBA 95A offers a 12% weight reduction in printed components versus FusFlex™ TPU95A-HF for comparable printed structures.
Product introduction
FusFlex™ PEBA 95A is an easily printable nylon-based elastomer. It exhibits lower density, higher elasticity, improved low-temperature performance, and enhanced chemical resistance compared to TPU flexible materials.
Product details
| Parameter | Value / range |
|---|---|
| Color | White, Black |
| Filament Ø | 1.75 mm |
| Net weight | 0.5 / 0.8 kg |
Material properties
Physical properties
| Property | Test method | Typical value |
|---|---|---|
| Density | ISO 1183 | 1.01 g/cm³ |
| Water absorption | ISO 62: Method 1 | 1.69 % |
| Melt index | - | 235 g/10min |
Thermal properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| - | |||
Mechanical properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| Tensile Break Strength XY | ISO527 | MPa | 27.64 ± 0.88 |
| Elongation at Break XY | ISO527 | % | 1018.82 ± 88.27 |
| Notched Impact XY | ISO179 | kJ/m² | 179 |
Printed specimen parameters:Specimens printed under the following conditions: Nozzle size 0.4mm，Nozzle temp 240°C, Bed temp 100°C, Print speed 60mm/s, Infill 100%, Infill angle ±45°
Disclaimer
Fusrock® 3D printing filaments are suitable for general printing applications and have been tested under standard conditions. However, the performance and safety of printed products are influenced by multiple factors, including printing parameters, model design, operating environment, and intended use. By using Fusrock® materials, users acknowledge and agree to independently evaluate the suitability of printed items for their specific applications and assume all associated risks. Fusrock® shall not be held liable for any damages, injuries, or losses resulting from the practical use of products printed with its materials, including but not limited to structural failures, malfunctions, or safety hazards in operational environments. Thorough testing must be conducted before applying printed components to critical, functional, or commercial scenarios. Fusrock® products are not certified for medical, aerospace, or life-support systems, except for certifications explicitly stated by Fusrock® for specific materials.
