FusFun™ PETG-Matte
Example FDM placeholders — replace with measured TDS values.
Product highlights
-
Product introduction
-
Product details
| Parameter | Value / range |
|---|---|
| Color | Black, White, Red, Blue, Yellow, Purple, Green |
| Filament Ø | 1.75 mm |
| Net weight | 1 kg |
Material properties
Physical properties
| Property | Test method | Typical value |
|---|---|---|
| Density | ISO 1183 | 1.30 g/cm³ |
| Melt index | - | 230 g/10min |
| Glass transition temperature | ISO 11357 | 80 °C |
Thermal properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| - | |||
Mechanical properties
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| Tensile Modulus XY | ISO527 | MPa | 2247 ± 37 |
| Tensile Break Strength XY | ISO527 | MPa | 29.25 ± 5.5 |
| Elongation at Break XY | ISO527 | % | 8.43 ± 2.53 |
| Flexural Strength XY | ISO178 | MPa | 68.27 ± 0.89 |
| Flexural Modulus XY | ISO178 | MPa | 2144.44 ± 35.54 |
| Notched Impact XY | ISO179 | kJ/m² | 5.64 ± 1.29 |
| Tensile Strength Z | ISO527 | MPa | 28.56 ± 2.04 |
| Tensile Modulus Z | ISO527 | MPa | 1813 ± 72 |
| Elongation at Break Z | ISO527 | % | 2.01 ± 0.22 |
Printed specimen parameters:Specimens printed under the following conditions: Nozzle size 0.4mm，Nozzle temp 250°C, Bed temp 75°C, Print speed 40mm/s, Infill 100%, Infill angle ±45°
Disclaimer
—
— Page 1 of 1 —