FusFlex™ TPU-Aero是一款专为FFF打印技术开发的中等硬度主动发泡型柔性材料，通过控制打印温度，可以实现不同的挤出发泡倍率，最终呈现出不同的减重和柔软度效果。FusFlex™ TPU-Aero打印件表面硬度可控制在65A-85A之间。在最大发泡率下，FusFlex™ TPU-Aero相比普通TPU材料可以减重50%，打印表面具有出色的类布艺质感。
제품 강점
FusFlex™ TPU-Aero is a flexible TPU material that foams during the printing process. FusRock® uses a special extrusion processing technique to uniformly distribute the foaming components within the TPU matrix in an unactivated state, ensuring that the entire spool of material remains at 1kg without weight reduction. By adjusting the printing temperature, the expansion ratio of the foaming components can be freely controlled, achieving different weight reduction and softness effects to meet various application requirements.
FusFlex™ TPU-Aero avoids the defect of significantly reduced filament hardness after foaming by using a special extrusion processing technique. The unactivated foaming components act as rigid particles uniformly distributed within the TPU matrix, effectively increasing the surface hardness of the FusFlex™ TPU-Aero filament and reducing printing difficulty. FusFlex™ TPU-Aero is compatible with most printers, with a maximum extrusion flow rate of 12mm³/s.
제품 소개
FusFlex™ TPU-Aero是一款专为FFF打印技术开发的中等硬度主动发泡型柔性材料，通过控制打印温度，可以实现不同的挤出发泡倍率，最终呈现出不同的减重和柔软度效果。FusFlex™ TPU-Aero打印件表面硬度可控制在65A-85A之间。在最大发泡率下，FusFlex™ TPU-Aero相比普通TPU材料可以减重50%，打印表面具有出色的类布艺质感。
제품 상세
| 항목 | 값 / 범위 |
|---|---|
| 색상 | White, Black, Bright Green |
| 필라멘트 직경 | 1.75 mm |
| 순중량 | 1 kg |
물성
물리적 특성
| 특성 | 시험 방법 | 대표값 |
|---|---|---|
| 密度 | ISO 1183 | 1.15 g/cm³ |
| 吸湿率 | ISO 62: Method 1 | 5.82 % |
| 熔融指数 | - | 190 g/10min |
열적 특성
| 특성 | 시험 방법 | 단위 | 220°C | 230°C | 240°C | 250°C |
|---|---|---|---|---|---|---|
| - | ||||||
역학적 특성
| 특성 | 시험 방법 | 단위 | 220°C | 230°C | 240°C | 250°C |
|---|---|---|---|---|---|---|
| 拉伸断裂强度 XY | ISO527 | MPa | 10.56 ± 0.32 | 7.75 ± 0.23 | 5.25 ± 0.05 | 3.92 ± 0.04 |
| 断裂伸长率 XY | ISO527 | % | 558.04 ± 34.79 | 545.54 ± 25.55 | 424.29 ± 18.35 | - |
| 打印件密度 | - | g/cm³ | 0.95 | 0.84 | 0.65 | 0.58 |
| 维卡软化点 | ISO306 | °C | 79.5 | 75.8 | 62.3 | 49.8 |
시편 출력 조건:试样打印参数：打印平台Bambu Lab H2D，喷嘴大小0.6mm，打印层高0.3mm，底板加热45°C，打印速度60mm/s，填充率100%，填充角度±45°
면책
Fusrock® 3D 打印耗材适用于通用打印用途，已在标准条件下进行测试。然而，打印成品的性能与安全性受多种因素影响，包括打印参数、模型设计、使用环境及实际用途。使用 Fusrock® 材料即表示用户已知悉并同意，自行评估打印件是否适用于其具体应用，并承担由此产生的全部风险。Fusrock® 对使用本公司耗材打印的产品在实际应用中可能导致的任何损害、伤害或损失不承担任何责任，包括但不限于结构失效、功能异常或使用环境中的安全隐患。在将打印件应用于关键、功能性或商业性场景前，请务必进行充分测试。除Fusrock®已标明材料所获得的各项认证资质外，Fusrock® 产品未取得医疗、航天或生命支持系统认证资质。
